Please note that all the following offers are:
$299 (U.P. $367)
Part No: Z-FIND-JR
The Z-Finder Jr. offers:
Included Accessories:
The Z-Finder Jr. does not have a diopter; instead, it uses Z-Finder Extender Frames to adjust the focal point. The Z-Finder Jr's focal point is -2.75 and up (unlimited with extender frames). The extender frames attach to the skirt of the Z-Finder Jr. and allow you to semi-permanently stack the frames until the LCD screen is in focus for you.
It uses a mounting bracket that must be sandwiched between a tripod plate and the camera - mount the bracket to your tripod plate using a ¼ 20" screw and the actual Jr. is held in place with pressure from the fork of the bracket it sits in.
Alternatively, you can also choose to mount the Z-Finder Jr. using the Z-Finder Mounting Frame (snap fit adhesive mounting frame) which is also included.
There is also a lanyard hook on the outside of the Z-Finder Jr. so you can attach the Zacuto lanyard to it. This will allow you to quickly take the Z-finder Jr. off and on when needed.
For a comparison between the three Z-Finder models, please click here.
For related DSLR video accessories, please click here.
| Please note: | |
| 1. | If you are going to be moving between extreme environments, it is suggested that you use an anti-fog material, such as the Zacuto Fog Eliminator. |
| 2. | The Z-Finder is a magnifier and as such, will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-Finder lens. This is not a defect, but a physical property. Caution should be taken to avoid sun magnification. |
| 3. | The included mounting bracket will only work on a small DSLR bodies such as the Canon EOS 5D/7D. To use the Z-Finder Jr. on a small DSLR body with a battery grip or a taller camera body like the Canon 1D Mark IV, you will need additional accessories such as the Gorilla Plate as well as the Mounting Frame for Small DSLR Bodies with Battery Grips or for Tall DSLR Bodies, or the snap fit mounting adhesive frame. |