Please note that all the following offers are:

  • Inclusive of 7% Goods and Services Tax (GST), applicable for local purchases only. Tourists who meet the criteria listed under the Tourist Refund Scheme will be eligible for a GST refund – please check with our staff for more information.
  • In Singapore dollars, unless otherwise stated.
  • Valid while stocks last.
  • Not valid with other promotions, privileges or offers.
  • Subject to change without prior notice.

Zacuto Z-Finder Pro 3x

$525 (U.P. $586)

Pro Video

  

FREE with purchase: 

  • Bluestar Eyepiece Chamois

 

 

 

 

  

Part No: Z-FIND-PRO3

 

The Z-Finder Pro 3x offers:

  • 3x focusable magnification
  • A 40mm-diameter Zacutor optical designed lens
  • An anti-fog coating protective cover
  • An eyecup preventing extraneous light leakage
  • A diopter
  • A field of view perfectly matched to 3" LCD screens.

 

Included Accessories:

  • 3 Extender Frames
  • Gorilla Plate with Mounting Frame for Small DSLR Bodies (Canon EOS 5D/7D type cameras)
  • Lens Cap & Protective Boot
  • Lanyard Hook and Lanyard
  • 3x Magnification Lens with an Anti-Fog Coating Protective Cover
  • Extra Anti-Fog Coating Protective Cover

 

The diopter allows you to dial in the focus to match your eye perfectly. The Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames). If you need extra focal point, you can use the Z-Finder Extender Frames - semi-permanent stackable frames that attach to the skirt of the Z-Finder Pro and extends the Z-Finder glass further away from the LCD screen for people who are farsighted.

The Z-Finder Pro uses the Gorilla Baseplate and Z-Finder Mounting Frame to mount to the camera. The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20” screw and the mounting frame attaches to the Gorilla Baseplate using thumb screws. The rubber-back mounting frame does not attach to your LCD screen; it is held in place against the screen by pressure.

This mounting method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up the metal mounting frame to release it.

 

For a comparison between the three Z-Finder models, please click here.

For related viewfinder accessories, please click here.

 

Please note:
1. The Z-Finder is a magnifier and as such, will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-Finder lens. This is not a defect, but a physical property. Caution should be taken to avoid sun magnification.
2. The tapped holes on the bottom of the Gorilla Plate are offset from the centre of the lens. This is only a concern if you are using the Gorilla Plate with other rigs that need the matte box in line with the lens/mounting screw hole.
3. The Gorilla Plate covers the battery compartment door on the Canon EOS 550D camera. If that is a problem, we suggest you use the adhesive frame instead.
4. If you are using your small DSLR body with a battery grip attached, you will need the Mounting Frame for Small DSLR Bodies with Battery Grips (optional). If you have a taller camera body like the Canon EOS 1D Mark IV, you will need the Mounting Frame for Tall DSLR Bodies (optional).
5. The anti-fog coating protective covers are expendable. They act as a protective cover for your lens so that your lens does not get damaged and they also help prevent the fogging of the lens. If you need extra anti-fog protective covers, in case they are scratched, lost, damaged, etc., they can be purchased separately.

 

▲ Go back to top