Follow us on:

Please note that all the following offers are:

  • Inclusive of 7% Goods and Services Tax (GST), applicable for local purchases only. Tourists who meet the criteria listed under the Tourist Refund Scheme will be eligible for a GST refund – please check with our staff for more information.
  • In Singapore dollars, unless otherwise stated.
  • Valid while stocks last.
  • Not valid with other promotions, privileges or offers.
  • Subject to change without prior notice.

Professional Video

Photography

Browse All Brands

Share this product spotlight with your friends:

Cinegears Ghost-Eye Wireless HD & SDI Video Transmission Kit 300M V2

$5,400 (U.P. $6,907)

Pro Video

 

Avoid the clutter and headache of cables with the Cinegears Ghost-Eye 300M Wireless Video Transmission System; one Ghost-Eye Wireless Video Transmitter 300M, and one Ghost-Eye Wireless Video Receiver 300M. With up to 300m of high fidelity, uncompressed HD video transmission, feel free as you shoot indoors or out, night or day.

With both 3G and HDMI inputs and outputs, using frequencies between 5.1-5.9GHz as needed (up to 4 simultaneously), you will utilize the current cutting edge of video transmission, adding a professional quality to your project.

The Cinegears Wireless HD/SDI HD Video Transmission system is an affordable and effective solution, requiring no technical skills and virtually no learning curve to operate.

 

Features:

  • 5GHz ISM Band wireless HD video transmission > 300m (980ft) depending on line of sight.
  • HDMI and SD/HD/3G SDI input and output.
  • Supports up to 3D 1080p/60Hz resolution, HDMI/HD-SD/3G-SDI 4:2:2, 10bits color depth.
  • Signal status indicators for power, video, and receiver RSSI.
  • AES-128/256 encryption with air interface HD video data stream.
  • Supports multiple channel switching and broadcast mode for 1 transmitter to multiple receivers.
  • HDMI 1.3 with EDID support.
  • Supports Timecode, LUT, start/stop sync.
  • Uncompromised picture quality with very low latency <1ms.
  • Wide range power voltage input, suitable for most kinds of camera batteries.
  • Plug & Play- full hardware design, no software is required.
  • Standard V-mount, Anton Bauer, or 1/4″ bolt.
  • Any input and output ports with ±8 kV ESD protection level (HBM, contact discharge).

 

What's included:

  • 1pc Wireless HDMI Video Transmitter 300M
  • 1pc Wireless HDMI Video Receiver 300M
  • 7pcs Paddle Antennas
  • 2pcs 15mm-27mm Mounting Brackets
  • 2pcs 2-Pin Power Cable for 300M System
  • 1pc Production Case with Foam Inserts

 

▲ Go back to top