Follow us on:

Please note that all the following offers are:

  • Inclusive of 7% Goods and Services Tax (GST), applicable for local purchases only. Tourists who meet the criteria listed under the Tourist Refund Scheme will be eligible for a GST refund – please check with our staff for more information.
  • In Singapore dollars, unless otherwise stated.
  • Valid while stocks last.
  • Not valid with other promotions, privileges or offers.
  • Subject to change without prior notice.

Share this product spotlight with your friends:

Deity V-Mic D3 Pro Location Kit

$408

Pro Video

 

What's Included:

  • V-Mic D3 Pro Shotgun Microphone
  • 3.5mm TRRS to TRRS Smart Cable
  • Rycote Lyre® Adjustable Cold Shoe Shock Mount
  • Rycote Duo-Lyre® Pistol Grip Boom Pole Shock Mount
  • Deity Foam Windscreen
  • Semi-Rigid Soft Carrying Pouch
  • D-XLR Phantom Power Adapter

 

Deity partnership with Rycote allow them to create the V-Mic D3 Pro Location Kit, a bundle that will allow you to mount the V-Mic D3 Pro professionally to a boom pole. Unlike other brands whose on camera mics can’t really live outside of their own designed shock mount, the V-Mic D3 Pro can fit into most universal shock mounts on the market. The filmmaker’s bundle kit adds a Rycote InVision Mount featuring the Duo-Lyre on a pistol grip and a D-XLR (phantom power to 3-volts 3.5mm adapter.)

 

The World’s First Smart Microphone

Inside the V-Mic D3 Pro lives a microprocessor that digitally shakes hands with the audio input it’s been plugged into. The D3 Pro will work with a phone, tablet, DSLR, body pack transmitters; just about anything with a 3.5mm microphone jack. When plugged into devices that have a stereo microphone input, the V-Mic D3 Pro outputs dual mono tracks.

The World’s Only Microphone with a Stepless Gain Knob

The V-Mic D3 Pro features a +20dB step-less analog gain adjustment dial. On each side of the dial the V-Mic D3 Pro features a bump guard that helps prevent the dial from being accidentally rotated. The +20dB of gain is added on a linear scale so you can dial in the exact amount of gain you need for the shot.

Internal Battery

Inside the V-Mic D3 Pro lives a 320mAh Lithium Ion battery. Run time for the V-Mic D3 Pro is 51 hours and will automatic turn off if left in standby mode for 15 minutes. The battery is charged in a little less than 2 hrs.

On-Board Low Cut Filters

The V-Mic D3 Pro features two levels of low cut: 75hz and 150hz. And instead of a switch that is sunken into the frame that’s hard to toggle, the D3 Pro does it all with a single button on top of the unit. With two levels of low cut the V-Mic D3 Pro is ready for even the windiest day.

Rycote Shock Mount

Deity partnered with Rycote to design this unique, one of a kind on-camera shock mount. This design allows you to mount the D3 Pro how ever you want: forward, middle, back. This means you can center it over your camera for perfect balance when using a gimbal. Underneath the hot shoe you will find a threaded female mounting point so you can mount it with a friction arm and use the V-Mic D3 Pro as a plant mic.

 

Specifications:

Transducer Principles: Pre-Polarized Condenser
Pick up Pattern: Super Cardioid
Frequency Range: 20Hz - 20kHz (selected HPF @75Hz/150Hz)
Output Impedance: 200Ω
Sensitivity: -50dB ~ -28dB re 1V/Pa @1kHz
Signal to Noise Radio 86dB SPL (@1kHz,rel 1Pa per IEC651) (Sensitivity = -23dB)
Battery Time: Lithium Battery: 1. During Standby: >74h  2. While In Use: >51h
Dynamic Range: 114dB (per IEC651)
SPL: 134dB SPL (@1kHz, 1%THD into 1kΩ)
Low Cut Frequency: 75Hz, 150Hz
THD: <0.1%
Battery Capacity: 320mAh
Output Port: Smart 3.5mm TRRS
Housing Material: Aluminum Metal
Dimensions: φ21x188mm
Weight: 143g

*Please note that the camera in the illustration is not included and is sold separately

 

▲ Go back to top