Portkeys BT1 Bluetooth Module for BM5 (To Control BMPCC 4K/6K)
- To control BMPCC 4K/6K
- Purchase of an additional camera control cable is required for certain cameras*
$197.00 (inc GST)
Important: If you already have BM5 monitor, you just need to buy BT1 if you would like to control BMPCC 4K/6K.
BM5 can wireless control BMPCC 4K&6K cameras via connecting BT1. Including REC, IRIS, ISO, Shutter, Zoom, Focus, Auto Exposure, White Balance Mode Selection, Resolution, Project Frame Rate, Codec and Quality, Off Speed Frame Rate, Off Speed Recording.
Sony A7II / A7III / A7IV series
Wired control Sony A7II / A7III / A7IV series cameras via connecting BT1 on BM5. Control cable with dummy battery which will be ready later month need to be purchased separately.
Tilta Nucleus N/M Follow Focus
Wired connect to motor out on BT1 for control. Including CAL、A/B Point、Follow Focus. Power supply to Tilta Nucleus Follow Focus system. Control cable need to be purchased separately.
Support Dummy Battery
When BM5 gets input power. The motor out on BT1 can power supply to the Tilta Nucleus Follow Focus system. The camera out on BT1 can power suppy to the cameras by the external dummy battery.
*Note: You will need to purchase 1pc camera control cable separately if you would like to control the below cameras.
Z CAM E2, Blackmagic URSA MINI, BMPC, Panasonic GH4, GH5, GH5S
Sony: A9, A7R3, A7M3, A7R2, A7S2, A6000, A6300, A6400, A6500
Canon: EOS C700, EOS C700PL, EOS C700 GSPL, EOS C300 Mark 2, EOS C300 Mark 2 PL, EOS 200, EOS C200B, EOS C100 Mark 2, EOS C100,1D X Mark Ⅱ, 5DS, 5DS R, 5D Mark Ⅳ, 5D Mark Ⅲ, 5D Mark Ⅱ, 6D Mark Ⅱ, 6D, 80D, EOS R
What's in the box?
- 1 x BT1 Bluetooth Module
- 1 x 2.4G/5G Dual Frenquency Antenna
- 1 x 2.4G Short Antenna
- 1 x Diameter 3mm,L-type Wrench
- 2 x M4 Inner Hexagon Screw
- 1 x Pocket
- 1 x Special Bluetooth Module Connect Cable
- 1 x Anti-Fall Safety Case